Environment modelling

The scene of play is indoors. And in my designed that include a table, chair, window and some table wares.

The table created start with a line. Firstly, I drew the line according the outline of the half table in the left view. And then, in order to smooth I would adjust the sharp through Bezier. Now, get a sooth curve. The curve is really important, because it is conditional on the sharp of table.

Next, I used the Lathe tools and set the Segment to 34 that looked smoother and set Align as Min align. Here, the sharp shown on frustum of a cone.

The table cloth made by Reactor.

The first step, a plan and a cylinder dragged on the top view, and adjusted the size. The cylinder used to act the size of table-top.

The second step clicked the cylinder and selected RBCcollection on the Reactor toolbar. Next, clicked the plan and selected the ‘apply the clot modifier’.

And then, the properties panel of reactor cloth displays the left. The mass, friction, density and resistance etc set as default. After that, add the cloth collection for the plan. And there is important that click the ‘Avoid Self-intersection’.

 

The third step I set the animation of the plan move from top by auto key. And then, clicked the preview window, see the process of plan drop. And click the play/pause through Simulation to record the point of time that the plan looked like table cloth. I select the Create Animation and move the time bar, pause it, and right click the plan chosen the Convert to Editable Poly.

At final, delete the cylinder, and align to the central column of table that be finished before.

 



The chair modeling

The chair modeling started with the line created. Drew the line and adjusted the sharp look like the side of chair. After that, select the Spline and chosen the Extrude through the Modifier list and reduce the amount of extrude.



The wine cup modelling

The wine cup modelling by Lathe. The method same as table made.

Drew a line and modify the sharp. There are different that in order to make the cup has thickness, the line could be made as:

Next, I created the wine on the cup. Also use Lathe, started with line drawn and adjusted.

And move and set the model into the cup, as well as group it.

And then, use the Lathe tool to make the sharp of cup.

But here has a point need take attention that the line adjusted should be alignment of the two centre points.